PoolEye Swimming Pool Alarm Monitoring System PE22
Inground Pool Alarm with In-Home Remote and Infared Perimeter Detection

Perimeter Detection
- Preventative Alert System
- Passive Infared Motion Detector (PIR) with Range of 180 degrees and up to 50 feet
- Independent On/Off Control with Child Proof Lock
- In-Home Remote Receiver Features Voice Announcements When Perimeter Alarm is Set Off
- Automatic Reset in 30 Minutes
- Adjustable Motion Detector (PIR) Sensitivity
Immersion Detection
- Patented Sub-Surface Wave Detection
- Sensor Placed Below Water Surface Eliminates False Alarms due to Wind, Rain, etc.
- Detects Objects 15lbs or More
- Adjustable Sensitivity
- 120 dB Alarm Siren, 95dB at 10 ft. at Poolside
System
- Tested to UL 464 and CSA C22.2
- Child-Proof On/Off Switch with Audio Indicator
- Stainless Steel Deck Mounting System and Ladder Mounting System Included
- Built-in RF Channel A or B Select
- Remote Receives Signal up to 100 feet away
- Remote can be Connected to a Home Security System
- Automatic Low Battery Check- Chirps Every 60 Seconds
Recommendations
- for Pools up to 18' x 36' (Larger Pools Require an Additional Alarm)
- Power Check Test Button
- Water-Resistant/Weatherproof Construction
- Interactive Weather-Resistant Control
- Remote Announces "Check the Pool" (3x) When Perimeter Alarm Signal Detected
- Remote Announces "Emergency! Check the Pool!" and Sounds Alarm When Underwater Alarm Signal is Received
- Remote Announces " Check the Battery" When Low Battery Signal is Received from Poolside Unit
- Remote uses AC Power Adapter, and 9 volt battery (not included) for Back-up
- Poolside Unit operates on Six AA Batteries (Not Included)

|